Panasonic WV-LC1710 Operating Instructions Manual

Also see for WVLC1710 - LCD MONITOR: Specifications

Contents

Panasonic WV-LC1710 Operating Instructions Manual Manual pdf 13 page image

13STARTUPOnscreen display of NO SIGNAL displays on the center of thescreen as shown below, when there is no input signal.Onscreen display of VIDEO LOSS displays on the center of thescreen as shown below, when currently used input is discon-nected.Note:• Press the AUTO button, when screen resolution ischanged from the connected PC.When changing the resolution setting, there are casesthat auto tuning will not be completed.(Refer to page 19)Onscreen DisplayS-VIDEOVIDEOCOMPONENTPCS-VIDEO INVIDEO INCOMPONENT INPC INVideo InputBefore operating this monitor, confirm that the camera, other video sources and peripherals are connected correctly and securely.When input signal is being detected, onscreen display ofPROCESSING appears on upper left portion of screen andperforms normal video display.Note:• During onscreen display of PROCESSING, all buttons(except POWER button) are disabled. All buttons areenabled after onscreen display of PROCESSING hasdisappeared.When picture is set to PC input, pressing the AUTO button initiatesauto tuning of picture size and position.Onscreen display of AUTO TUNING displays on the center of thescreen as shown below.NO SIGNALAUTO TUNINGVIDEO LOSS1. Turn on the monitor by pressing the POWER button.The power indicator lights up in green.2. Select the desired input to be displayed by pressing the INPUTSELECT button.Onscreen display of the input signal currently on use displaysfor approximately 2 seconds on upper left portion of the moni-tor screen.VIDEO S-VIDEOPC COMPONENT3. Press the INPUT SELECT button to select the desired inputsignal while it is being displayed.Pressing the button repeatedly displays input in the sequenceshown below. Onscreen display of selected input appears forapproximately 3 seconds.