Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 47 page image

47Settings relating to cameras [Camera]Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings ofthe group and the settings of the sequential display.Perform the settings for network connection [NW Camera Setup]Perform the network camera settings such as the camera IP address and the port number.The settings are configured differently between when automatically detecting and registering the IP addresses of thecameras and when registering the IP addresses of the cameras manually.Automatically detect and register the IP addresses of the camerasScreenshot 1Click the [Camera] button in the "Setup" panel and thenclick the "NW Camera Setup" tab. The "NW CameraSetup" page will be displayed.Step 1Click the [Search] button of "Camera Search" to detectthe cameras.Notes:• When "Camera Search" is carried out, the otherlogin users will be forcibly logged out.• Recordings currently being carried out on this unitwill stop in the process of "Camera Search".• "Camera Search" is unavailable for cameras on adifferent subnet.• Depending on the camera model, the unit cannotdetect them for their security when 20 minutes havepassed after the power of the camera is turned on.Refer to the operating instructions of the camera forfurther information.