34Functions for the emergency recording [Emergency REC]Perform the settings for the emergency recording.Settings for emergency recording [Emergency REC]Perform the settings for emergency recording such as the recording time, recording rate and audio recording. Referto the provided installation guide (book) for further information about emergency recording.Screenshot 1Click the [Emergency REC] button to display the"Emergency REC" page. Step 1Perform the settings for each item.Refer to the following for further information about thesettings for each item.Step 2Click the [SET] button after completing the settings.Important:Recording will not be performed for around 4 sec-onds just after the emergency recording.Setup items Recording DurationPerform the settings for emergency recording such asthe recording duration or recording operations.The following are available for the recording duration.2 s/5 s/10 s/20 s/30 s/1 min/3 min/5 min/10 min/30 minMANUAL: Recording will continue during the emer-gency recording input is being supplied.CONTINUE: Recording will not stop until the [ALM] but-ton is clicked.Note:When "MANUAL" is selected, recording will be per-formed for at least 8 seconds. RECORDER SETUPRECORDING RATEPerform the settings for emergency recording for eachcamera channel such as the recording rate.The following are available for "Recording Rate". When"OFF" is selected for a specified camera channel,images from a camera channel set to "OFF" will not berecorded.OFF/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-FrameNote:The available value differs depending on the select-ed image compression method. The compressionmethod can be set on the "MODEL/COMPRES-SION" setting of the setup menu ("Camera" – "NWCamera Setup" – "MODEL/COMPRESSION").