Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 21 page image

21[Zoom] boxZooming can be adjusted by clicking the [WIDE]button or the [TELE] button.When the [x1] button is clicked, the adjustedzoom will be reset.[Focus] boxFocusing can be adjusted by clicking the[NEAR] button or the [FAR] button.The auto focus function can be performed by clickingthe [AUTO] button.[Auto mode] boxThis box allows users to select the auto mode functionand operate the camera.Click the button to select the auto mode function(Auto Track, Auto Pan, Preset Sequence, Sort, orPatrol) of the camera, and click the [START] but-ton.Click the [STOP] button to stop the auto modefunction.Control pad/buttonsClicking the buttons around the control pad can move(pan/tilt) a camera in the clicked direction. Clickinginside the control pad also can adjust the vertical/hori-zontal position (pan/tilt) of the displayed image.Panning/tilting speed will be faster if a clicked point getsfarther from the center point of the control pad.[Brightness] boxThe brightness can be adjusted by clicking the[–] button or the [+] button. It is possible to resetthe set brightness by clicking the [RESET] but-ton.[Preset] boxThis box allows users to register the current cameradirection on a specified preset position. Aim the cameraat a direction to be registered, click the button toselect a preset number (1-256), and click the[Program] button.Move the camera to the preset position registered inadvance. Click the button to select the preset numberand click the [GO] button.[CAM] TabControl pad/buttons