Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 48 page image

Setup items Camera SearchClick the [Search] button to search cameras again.[MODEL]The model number of the detected camera will be dis-played.[MAC Address]The MAC address of the detected camera will be dis-played.[IP Address]The IP address of the detected camera will be dis-played.[New IP Address]Enter an IP address to be given to the detected camera.[DHCP]The DHCP setting of the detected camera will be dis-played. (The displayed DHCP setting can be edited.) IP Address SetCheck the checkbox of the detected camera to whichthe entered IP address is given, and then click the[Execute] button. Start IP AddressWhen automatically giving IP addresses to the detectedcameras, enter the IP address to be given to the cam-era as the first address. Check the checkboxes of thedetected cameras to which the IP addresses are auto-matically given, and then click the [Execute] button.When the [Execute] button is clicked, serial IP address-es starting from the IP address entered for "Starting IPAddress" will be given to the detected cameras whosecheckbox is checked.Notes:• Before giving IP addresses automatically, set thesubnet of the network port to "255.255.255.0".• The image compression method of the registeredcamera will automatically be set to "JPEG" or "M-JPEG".• When the IP address is registered to the camera,the HTTP port of the camera will automatically set to"80", and the same subnet and the gateway of theunit will be set to the camera.• When the [Execute] button is clicked and the IPaddresses of the cameras are changed, the check-boxes of the detected cameras (1-16) on the"Camera Search Result" window will be checked.48Screenshot 2The detected cameras will be displayed in the "CameraSearch Result" window. Step 2Perform the network settings of the detected cameras.Check the checkbox of the detected camera to be regis-tered and perform the settings. Refer to the following forfurther information about the settings for each item.Note:When the same IP address is used for two camerasor more, the IP address and the MAC address willbe displayed in red on the "Camera Search Result"window. In this case, change the IP address set fortwo cameras or more and make sure that no sameIP address is set for two cameras or more.Step 3Click the [SET] button.