Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 55 page image

55Settings relating to network [Comm]Perform the settings for a network connection such as settings of the IP address and gateway address.Basic settings for a network [Basic Setup]Basic network settings can be configured with this menu.Screenshot 1Click the [Comm] button in the "Setup" panel and thenclick the "Basic Setup" tab. The "Basic Setup" page willbe displayed.Step 1Perform the settings for each item.Refer to the following for further information about thesettings for each item.Step 2Click the [SET] button after completing the settings. NW Link down detectionSelect "ON" or "OFF" to enable or disable the networkline disconnection detection for the network port on therear of the unit.ON: Detects if the disconnection of the network lineconnected to the network port occurs.OFF: Does not detect the network line disconnection. NW Bandwidth ControlSelect a rate for transmission from the following.Unlimited/32 kbps/64 kbps/128 kbps/256 kbps/512 kbps/1 024 kbps/2 Mbps/5 Mbps/10 MbpsImportant:The bandwidth will not be controlled when liveimages are transmitted in MPEG-4 format. HTTP Port NumberSpecify the HTTP port number to be used to sendimages from the unit. A number from 1 - 65535 is avail-able.It is unnecessary to change it for normal use.Notes:• Depending on the network settings of the LAN orInternet service provider, network communicationmay not be established if the http port number hasbeen changed. In this case, refer to the administra-tor of the network.• The following port numbers and the port numbersused for the FTP port and for the site alarm settingare unavailable for the HTTP port number.20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 105, 110, 123,161, 162, 546, 547, 995, 10001, 10002, 10003,10004, 10005, 10006, 10007Setup items