Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 36 page image

36Functions for events [Event]Perform the settings for event actions of each event type (site alarm and terminal alarm). Refer to the provided oper-ating instructions for further information about each event type.Basic settings for event actions [Basic Setup]Perform the settings relating to event actions such as the alarm output duration and the buzzer sound duration ofeach camera channel at an event occurrence (site alarm and terminal alarm).Screenshot 1Click the [Event] button in the "Setup" panel and thenclick "Basic Setup" tab. The "Basic Setup" page will bedisplayed.Step 1Perform the settings for each item. Alarm OutputSelect the alarm output duration.The following are available for alarm output duration.OFF: No alarm output is supplied.2 s/5 s/10 s/20 s/30 s/1 minEXT: The alarm output will continue until the [ALM] but-ton is clicked.REC: The alarm output will be supplied during the eventrecording is being performed. BuzzerSelect "OFF", "EXT", "REC" or a buzzer sounding dura-tion at an event occurrence. The following are availablefor buzzer sound duration.OFF: The buzzer will not sound.2 s/5 s/10 s/20 s/30 s/1 minEXT: The buzzer will continue until the [ALM] button isclicked or the [BUZZER STOP] button on the frontpanel is pressed.REC: The buzzer will sound only during the eventrecording is being performed.Step 2Click the [SET] button after completing the settings.