Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 20 page image

20[FF] buttonFast playback will be performed. Playback speed forfast playback will be changed in the following ordereach time this button is clicked: Step2 (Approx. 4x) →Step3 (Approx. 8x) → Step4 (Approx. 16x) →Step5 (Approx. 32x) → Step6 (Approx. 48x) →Step7 (Approx. 96x)[PREV IMAGE] buttonThe previous frame will be displayed when this button isclicked during playback/pausing.[PAUSE] buttonPlayback will be stopped when this button is clicked dur-ing playback. Playback will be resumed when this but-ton is clicked during pausing.[STOP] buttonStops playback and displays a live image.[NEXT IMAGE] buttonThe next frame will be displayed when this button isclicked during playback/pausing.[Download (TO PC)] boxDownloads the image currently playing to a PC.[Download] buttonDisplays the download setting window for download-ing images.Date and time of the download start/end points willbe displayed in the playback position operationsarea.[VIEWER] buttonClicking this button will start downloading the viewersoftware that can play downloaded images.[TEXT] buttonThe attached text information will be displayed whenthis button is clicked during pausing.[REC] boxThe recording button, the recording stop button and theSD memory data obtain button will be displayed whenthe button is clicked.The recording button, the recording stop button and theSD memory data obtain button will be hidden when thebutton is clicked.SD memory data obtain buttonObtains recorded images on the SD memory cardon the camera. The letters "SD" on this button will bedisplayed in red when the SD memory data is cur-rently being obtained.The letters "SD" on this button will be displayed inblue when there is no recorded image on the SDmemory card. When this button is clicked while theletters "SD" are displayed in blue, the unit will checkif there is any recorded image on the SD memorycard or not. When a recorded image is found, theletters "SD" on the SD memory data obtain buttonwill turn red and obtainment of SD memory data willstart.Recording button: Starts manual recording.Recording stop button: Stops manual recording.Important:To display the recording button and the recordingstop button, hold down the button until they aredisplayed.Note:When played image is in MPEG-4 format, resultsfrom operating the some buttons will be as follows.[GO TO DATE] button: Playback sometimes maystart from a point several seconds after the des-ignated time and date.[REV PLAY] button: Some frames of recordedimages will not be displayed. Reverse playbackwill be performed with the set refresh interval ofthe camera.[PLAY] button (during playback): When the[PLAY] button is clicked during playback, imageswill be skipped for several seconds. (Playbackwill starts from a point several seconds after thecurrent point.)[PREV IMAGE] button: Some frames of recordedimages will not be displayed. Reverse frame playwill be performed with the set refresh interval ofthe camera.[FF]/[REW] button: Some frames of recordedimages will not be displayed. Fast playback/fastreverse playback will be performed with the setrefresh interval of the camera.[Download] button (during playback): Downloadmay start from a point several seconds later thanthe designated start time and may end at a pointseveral seconds after the designated end timewhen downloading MPEG-4 images.