Panasonic Viera TH-50VX100 Operating Instructions Manual

Also see for TH-50VX100U: Service manual Operating instructions

Contents

Panasonic Viera TH-50VX100 Operating Instructions Manual Manual pdf 9 page image

1 2SERIALPC INAUDIOSLOT1 SLOT2 SLOT3COMPONENT/RGB INAUDIOR L PR /CR /R PB/C B/B Y/G12 12129Connections– Cable fixing bandSecure any excess cables with band as required.Note:Make sure that the ACcord is locked on boththe left and right sides.Push untilthe hookclicks.1. Keep theknob pressed.CloseOpen1 Plug the AC cord intothe display unit.Plug the AC cord until itclicks.2 Fix the AC cord withthe clamper which isattached to the unit.Note:One fixing band is supplied with this unit. In case of securing cables at two positions, please purchase it separately.Speakerterminal (R)Speakerterminal (L)When connecting the speakers, be sure to use only the optional accessory speakers.Refer to the speaker’s Installation Manual for details on speaker installation.Pass the attached cablefixing band through theclip as shown in thefigure.To secure cables connected to Terminals, wrap the cable fixing band around themthen pass the pointed end through the locking block, as shown in the figure.While ensuring there is sufficient slack in cables to minimize stress (especiallyin the power cord), firmly bind all cables with the supplied fixing band.From SERIALTerminal onComputer(see page 11)From EXTERNALmonitor terminalon Computer(see page 10)AC cord connection (see page 13)Dual HDMI Terminals (equivalentof Dual HDMI Terminal Board(TY-FB10HMD))(see page 12)To tighten: To loosen:PullPullPush the catchNote: At factory shipment, Terminal boards are installed in SLOT 1, SLOT 2 and SLOT 3.– AC cord fixingCOMPONENT/RGB IN andAudio IN Terminals (equivalentof RCA Component VideoTerminal Board (TY-42TM6Z))(see page 12)Unplug the AC cordUnplug the ACcord pressing thetwo knobs.Note:When disconnecting the ACcord, be absolutely sure todisconnect the AC cord plug atthe socket outlet first.2. Pull off.