STANDARDAUDIO MENU00001OFFBASSNORMAL IZEMIDTREBLEBALANCESURROUNDVOLUME33SOUND AdjustmentNote: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.While the “SOUND” menu is displayed, if the OK button is pressed during “NORMALIZE”, then all adjustment valuesare returned to the factory settings.Helpful Hint ( NORMALIZE Normalization)Item DetailsAUDIO MENUSTANDARD: Emits the original sound.DYNAMIC: Accentuates sharp sound.CLEAR: Attenuates human voice.BASS Adjusts low pitch sounds.MID Adjusts normal sounds.TREBLE Adjusts pitch sound.BALANCE Adjusts left and right volumes.SURROUNDSelect ON or OFF.The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if youwere at a concert hall or cinema.VOLUME Adjust the sound volume level.Item DetailsLEFT CHANNEL CHANNEL 1 to CHANNEL 16Selects left audio channel.RIGHT CHANNEL CHANNEL 1 to CHANNEL 16Selects right audio channel.SOUND OUTON OFFON: Enables audio output.OFF: Disables audio output.LEVEL METEROFF 1-8CH 9-16CHSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter; 4channels each on both right and left sides of the display.OFF: Hides the audio level meter.1-8CH: Displays the audio level meter (1-8ch)9-16CH : Displays the audio level meter (9-16ch)SDI SOUND OUTPUTThis menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board(TY-FB11DHD) is installed to the unit.Note:This menu is available only when selecting aslot that HD-SDI Terminal Board with audio(TY-FB10HD) or Dual Link HD-SDI TerminalBoard (TY-FB11DHD) is installed.1 Display the menu screen.2 Select “SOUND”SET UPPOS. /SIZESOUNDPICTURE 2 OK1 select3 Select the item and set.STANDARDAUDIO MENU00001OFFBASSNORMAL IZEMIDTREBLEBALANCESURROUNDVOLUME2 adjust or select1 select4 Exit the menu. orCHANNEL 1LEFT CHANNELSDI SOUND OUTPUT 2/2CHANNEL 2RIGHT CHANNELONSOUND OUTOFFLEVEL METER