Panasonic Viera TH-50VX100 Operating Instructions Manual

Also see for TH-50VX100U: Service manual Operating instructions

Contents

Panasonic Viera TH-50VX100 Operating Instructions Manual Manual pdf 40 page image

40Note:“SIGNAL” setup menu displays a different setting condition for each input signal.SET UP for Input SignalsSIGNAL menuCOMPONENT/RGB-IN SELECTEXTERNAL SCALER MODEPOWER SAVESTANDBY SAVEPOWER MANAGEMENTAUTO POWER OFF OFFOFFONOFFOFFRGBOSD DESIGN TYPE1OSD POSITION UPPER LEFTOSD LANGUAGE ENGLISH (US)SCREENSAVERSIGNALFor RGBAUTOSYNC1024 ×76833.7 kHz60.0 Hz1125(1080)/60iXGA MODE100 HzREFRESH RATEH-FREQ.V-FREQ.SIGNAL FORMATSIGNAL [ RGB ]For COMPONENT For Digital1024 ×768XGA MODE100 Hz33.7 kHz60.0 Hz1125(1080)/60iREFRESH RATEH-FREQ.V-FREQ.SIGNAL FORMATSIGNAL [ COMPONENT ] SIGNAL [ Digital ]100 HzREFRESH RATE33.7 kHz60.0 Hz1125(1080)/60iH-FREQ.V-FREQ.108.0 MHzDOT CLOCK-FREQ.SIGNAL FORMATXGA MODEThis menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signalswith 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @60Hz, and 1,366 × 768 @ 60Hz). Be sure to make settings in accordance with the input signal in order to achieve amore appropriate and attractive display.In addition, after making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE”menu as necessary. (see page 30)1024 ×768XGA MODE100 HzREFRESH RATESIGNAL [ COMPONENT ]2 change1 select1024×768 1366×7681280×768REFRESH RATEThis function sets the refresh rate of the display.This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.100 Hz: Reduce screen flicker.50 Hz: Enhance the resolution of moving images.Note:It is recommended to set to 100 Hz normally.1024 ×768XGA MODE100 HzREFRESH RATESIGNAL [ COMPONENT ]2 change1 select100 Hz 50 Hz