Panasonic Viera TH-50VX100 Operating Instructions Manual

Also see for TH-50VX100U: Service manual Operating instructions

Contents

Panasonic Viera TH-50VX100 Operating Instructions Manual Manual pdf 41 page image

33.7 kHz60.0 Hz1125(1080)/60iH-FREQ.V-FREQ.SIGNAL FORMAT33.7 kHz60.0 Hz1125(1080)/60iH-FREQ.V-FREQ.108.0 MHzDOT CLOCK-FREQ.SIGNAL FORMAT41SET UP for Input SignalsSelect SIGNAL from the “SET UP” menu during RGB input signal.SYNCSetting RGB sync signalConfirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal)AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and Vsync.ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.Displays the frequency and the type of the current input signal.This display is valid only for COMPONENT/RGB/PC and Digital input signal.Display range:Horizontal 15 - 110 kHzVertical 48 - 120 HzInput signal displayThe dot clock frequency is displayed during digital signal input.Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).Note:Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD)is selected.SDI THROUGHAUTOSYNC1024 ×768XGA MODE100 HzREFRESH RATESIGNAL [ RGB ]2 change1 selectAUTO VBSON GSIGNAL [ Digital ]OFFSDI THROUGH100 HzREFRESH RATE2 change1 selectONOFFON: Enables active through.OFF: Disables active through.