27Picture ProfilesLoad profiles and apply the picture adjustment values to the display as follows.Note:Loaded profiles are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN).1 In the PICTURE menu, select “MEMORY LOAD”.MEMORY SAVEMEMORY LOADMEMORY EDIT2 OK1 select2 Select the profile to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 OK1 selectProfiles are labeled with these icons to indicate theirlocked status. (see below) on the remote control>1 Press to list the profiles.2 Select the profile to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 OK1 selectProfiles are labeled with these icons to indicate theirlocked status. (see below)To load profiles 1–91 Press a button in the range – .2 Select “OK”.OK CANCELMEMORY LOADLOAD FROM MEMORY2 1 1 select2 OKTo load profiles 10–16Example: To load profile 161 Press .The profile number is displayed in the upper-rightcorner of the screen.162 Select “OK”.OK CANCELMEMORY LOADLOAD FROM MEMORY16 1 select2 OKLock1Picture adjustment values are shown.Lock2Picture adjustment values are hidden.PICTURE MENU DYNAMIC2505OFFNORMALPICTURENORMAL IZEBRIGHTNESSSHARPNESSCOLOR TEMPCOLOR MANAGEMENTADVANCED SETTINGS6COLOR0TINTCan bespecified.Cannot bespecified.PICTURE MENU DYNAMICPICTURENORMAL IZEBRIGHTNESSSHARPNESSCOLOR TEMPCOLOR MANAGEMENTADVANCED SETTINGSCOLORTINTCan bespecified.Cannot bespecified.Loading profilesLoading locked profiles…In the PICTURE menu, profiles are labeled with these icons to indicate their locked status.PICTURE MENU DYNAMIC250PICTURENORMAL IZEBRIGHTNESS:Lock1:Lock2Operations with locked profiles are restricted. (see page 29)Picture adjustment values in the PICTURE menu cannot be changed, except for the “PICTURE MENU”.Once you edit the “PICTURE MENU” setting, you can edit “PICTURE”, “BRIGHTNESS”, and other picture adjustmentvalues.