Panasonic Viera TH-50VX100 Operating Instructions Manual

Also see for TH-50VX100U: Service manual Operating instructions

Contents

Panasonic Viera TH-50VX100 Operating Instructions Manual Manual pdf 37 page image

37Reduces power consumption1 Display the menu screen.2 Select “SET UP”.SET UPPOS. /SIZESOUNDPICTURE2 OK1 select3 Select the item and set.COMPONENT/RGB-IN SELECTEXTERNAL SCALER MODEPOWER SAVESTANDBY SAVEPOWER MANAGEMENTAUTO POWER OFF OFFOFFONOFFOFFRGBOSD DESIGN TYPE1OSD POSITION UPPER LEFTOSD LANGUAGE ENGLISH (US)SCREENSAVERSIGNAL2 change1 select4 Exit the menu. orCOMPONENT/RGB-IN SELECTEXTERNAL SCALER MODEPOWER SAVESTANDBY SAVEPOWER MANAGEMENTAUTO POWER OFF OFFOFFONOFFOFFRGBOSD DESIGN TYPE1OSD POSITION UPPER LEFTOSD LANGUAGE ENGLISH (US)SCREENSAVERSIGNAL● POWER SAVE When this function is turned ON, luminous level of the Plasma Display is suppressed,so power consumption is reduced.● STANDBY SAVE When this function is turned ON, power consumption of the microcomputer is reducedduring power supply standby (see page 13, 15, 16), so standby power of the set isreduced.● POWER MANAGEMENT When this function is set to ON, it operates under the following conditions to turn thepower on or off automatically.When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC INsignal input:→Power is turned off (standby); the power indicator lights up orange.When pictures (HD/VD sync signals) are subsequently detected:→Power is turned on; the power indicator lights up green.Notes:• This function operates only during PC IN signal input.• This function is effective when “SYNC” is set to “AUTO” and “COMPONENT / RGB-INSELECT” is set to “RGB”.● AUTO POWER OFF Equipment power supply is turned OFF when there is no signal.When this is set to On, the power supply of the unit goes Off 10 minutes after the inputsignals stop.Note:• This function is effective for input signals except PC IN terminal.