Panasonic TX32DTX-40 Operating Instructions Manual

Panasonic TX32DTX-40 Operating Instructions Manual Manual pdf 9 page image

9Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of thescreen (colour purity). The Geomagnetic Correction feature can be used to eliminate them, if necessary:First, ensure the Auto setup and Q ---Link download procedures are complete.The screen should not be showing any On ---Screen Display menus.Open the flap on the television’s front panel.Press and release here to open flapPress the F button (1) repeatedly until the Geomagnetic Correction feature is displayed .Press the + or --- buttons (2) or (3) repeatedly until the picture appears to be level.Press the F button (1) again to return to normal viewing.Close the flap to prevent damage.You are now ready to begin viewing programmes.To switch between analogue and DVB modes, press the Mode button (4).To switch to AV mode, press the TV/AV button (5).678--/vF(1) (2) (3)Press the Red (6), Green (7), Yellow (8) or blue (9) multi function button (whilst theoptions remain on screen) to choose which AV source to view. Should the optionsdisappear, press any multi function button (6), (7), (8) or (9) to restore them.Press the TV/AV button (5) to exit from AV mode.The AV Select menu will allow you to choose which AV source to view. AV select menu(5) (6) (7) (8)(4) (9)9Adjust the volume using the Volume button (10).Change programme positions using the Channel button (11).(11)(10)QUICK START GUIDE