Panasonic TX32DTX-40 Operating Instructions Manual

Panasonic TX32DTX-40 Operating Instructions Manual Manual pdf 18 page image

1818The Programme edit menu allows you to edit the analogue programme position settingsUsing the Menu button (1), open the Main Menu.Access the Setup menu.Move to Tuning menu (2).Access Tuning menu (3).Move to Programme edit menu (2).Access Programme edit menu (3).Make required changes (see sections below).Press OK button (4) to store changes.If you have finished in the Programme edit menu, press the EXITbutton (5) to return to normal viewing.(1) (2) (3) (4) (5)To delete an unwanted programme positionEnsure that the cursor is in the Prog. Column.Choose the programme position (2).Press the Red button (7) on remote control.Press the Red button (7) again to confirm.If you have finished in the Programme edit menu, press the EXITbutton (5) to return to normal viewing.(7)To add a programme positionChoose the programme position where the new programme is tobe inserted (2).Press the Green button (8).Press the Green button (8) again to confirm.The blank programme can then be tuned (see page 21), named(see page 19) or locked (see page 19).Press the OK button (4) to store the programme position.Press the Setup button (1) to return to the Programme edit menu.If you have finished in the Programme edit menu, press the EXITbutton (5) to return to normal viewing.(8)ANALOGUE TUNING MENU -- PROGRAMME EDIT