Panasonic TX32DTX-40 Operating Instructions Manual

Panasonic TX32DTX-40 Operating Instructions Manual Manual pdf 16 page image

1616The Setup menu provides access to various advanced features and also to the Tuning menuUsing the Menu button (1), open the Main Menu.Access the Setup menu.Move to your choice (2).Increase or decrease levels, set options or access furthermenus (3).Press the EXIT button (4) to exit the Setup menu.(1) (2) (3) (4)The DVB Timer programming menu allows you to enterprogramme times at which the DVB tuner must switchon, ready for recording .See page 28.DVB tuner lock prevents you from accidentallychanging programme position while recording a DVBbroadcast. If the TV is switched into standby mode whileDVB tuner lock is on, the DVB tuner will remain active toensure recording can still take place.DVB Auto Setup allows you to clear all current digitaltuning data, and scan for new services. See page 20.DVB System Setup provides access to variousspecialised DVB options. See page 24.This TV continually scans for updated DVB services andnotifies you of any changes. Set to ON to receivenotification. Set to OFF if you do not wish to be informedof any updates.Allows you to clear all tuning information and reset allcontrol levels back to factory settings. See page 21.You may wish to lock a DVB programme channel toprevent access to it. Set to ON to lock the currentprogramme position. Set to OFF to unlock.When a programme position is locked, Direct ChannelAccess using the ’C’ and numeric keys on the remotecontrol is not available.AV2 out offers you a choice of signals to send to the AV2 SCART socket. You can choose from the signals currentlytuned on the Analogue or DVB tuners, or Monitor --- the picture displayed on screen.The Teletext option allows you to choose between FASTEXT or LIST mode. See page 33.Off timer will switch the TV off within a preset time which you can choose from between 0 to 90 minutes in 15 minuteintervals.Volume correction (in AV mode only) allows you to adjust the volume level of each AV input to compensate for anydifferences in audio levels from external equipment.The Tuning menu provides an entry to many other analogue features including Programme edit and Auto setup.See page 17.Lets you control any picture movement. Set to ON to correct minor picture movement. Set to OFF to have no flickerreduction at all.Controls what you see when you switch the TV set on. Set to TV to view picture from your TV tuner.Set to AV to view input from any live equipment attached to a scart socket on your TV (eg. set top box, digitalconverter box etc.)Note:---The external equipment must be switched on and transmitting a signal for automatic switching to occurIf you notice a slight tilt to the picture or if there are coloured patches at the corners of the screen, use this featureto eliminate them. See Step 6, page 9 (Quick Start Guide).SETUP MENUSetup menu in Analogue ModeSetup menu in DVB ModeSetup menu in AV ModeOff timerTeletextVolume correctionDVB tuner lockDVBTimer ProgrammingDVB System SetupAnalogueTuning MenuDVB Auto SetupNew ServiceMessageShipping conditionChild LockAV2 outFlicker reductionGeomagneticPower onPreference