Panasonic TX32DTX-40 Operating Instructions Manual

Panasonic TX32DTX-40 Operating Instructions Manual Manual pdf 6 page image

66Connection and setting up optionsNote:-- Please ensure that the unit is not connected to the mains before any leads are attached or removed.MainsSocketRF ConnectionD Connect the RF cable into the TV Aerial socket ( ).Connection of TV using an RF cable onlyAerialInputsocketTVScart ConnectionsD The VCR / DVD Recorder can also be connected to the TV using a Scart cable, if you are using a Scart equipped VCR/ DVD Recorder.D Use the TV’s AV2 Scart socket for any VCR. Always use a “fully wired” Scart cable.D Use the TV’s AV1 or AV4 Scart socket for any DVD Recorder. Always use a “fully wired” Scart cable.RF ConnectionD Connect the RF cable to the “Aerial In” socket of the VCR / DVD Recorder and an RF cable from the VCR / DVD RecorderAerial Out socket to the TV Aerial socket ( ).Notes :If using a “Q--Link” VCR / DVD Recorder, then the AV1 Scart of the VCR / DVD Recorder must be connected to the AV2 socketof the TV. If your VCR or DVD Recorder is not a “Q--Link” device, please consult the operating instruction book for that product.Further information on Q--Link can be found on page 31.Connection of TV and VCR or DVD Recorder using Scart and RF cablesVCR / DVD RecorderMainsSocketAerialOutputsocketAerialInputsocketAerialInputsocketAV2 Scart socketTVDVDRVCRNotes:D A Satellite Receiver can be connected to any available Scart socket. If all sockets are in use, please refer to your VCR or DVDRecorder operating instruction manual for further connection options.D Additional equipment and cables are not supplied.D Further details of audio/ video connections can be found on pages 36 and 37.D Further information for VCR or DVD Recorder installation with this TV can be found on page 32.QUICK START GUIDE