Panasonic TX32DTX-40 Operating Instructions Manual

Panasonic TX32DTX-40 Operating Instructions Manual Manual pdf 22 page image

2222Owner I.D. allows you to enter a security code and address information so that in the unfortunateevent of theft it will help the Police to determine the owner.If the Owner I.D. information was not entered after Auto setup or it is necessary to alter some of the I.D.information it can be re--accessed via the Tuning menu.ANALOGUE MODEUsing the Menu button (1), open the Main Menu.Access the Setup menu.Move to Analogue Tuning menu (2).Access Analogue Tuning menu (3).Move to Owner I.D. (2).Access Owner I.D. (3).(1) (2) (3)If the Owner I.D. has previously been set, enter the PIN NUMBER,using 0 to 9 on the remote control (4), followed by OK (5). This willtake you to the NAME option.(4) (5)If no Owner I.D. has previously been set, enter the required 4 digitOwner I.D. PIN NUMBER, using 0 to 9 on the remote control (4).If a 4 digit PIN NUMBER was entered above, you will be takenautomatically to the NAME line.If not, move to the NAME line (3).Change character (2).Select character position (3).Repeat above until NAME, HOUSE NUMBER and POSTCODEare entered.Press OK to store the details (5).Press OK again, to confirm, when asked, “Are you sure ?” (5).ANALOGUE TUNING MENU -- OWNER I.D.For future reference,write your PIN Number here :Return --