Panasonic TX-40C320E Operating Instructions Manual

Panasonic TX-40C320E Operating Instructions Manual Manual pdf 6 page image

English - 6 -If pressed Right button while Auto option is selected orLeft button while Custom option is selected, “Screenwill be off in 15 seconds.” message will be displayedon the screen. Select Proceed and press OK to turnthe screen off immediately. If you don’t press anybutton, the screen will be off in 15 seconds. Pressany button on the remote or on the TV to turn thescreen on again.Note: Screen Off option is not available if the Mode is setto Game.When the TV is not in use, please switch off ordisconnect the TV from the mains plug. This will alsoreduce energy consumption.Features• Remote controlled colour TV• Fully integrated digital terrestrial/cable TV (DVB-T/C)• HDMI inputs to connect other devices with HDMIsockets• USB input• OSD menu system• Scart socket for external devices (such as DVDPlayers, PVR, video games, etc.)• Stereo sound system• Teletext• Headphone connection• Automatic programming system• Manual tuning• Automatic power down after up to eight hours.• Sleep timer• Child lock• Automatic sound mute when no transmission.• NTSC playback• AVL (Automatic Volume Limiting)• PLL (Frequency Search)• PC input• Game Mode (Optional)• Picture off function• Ethernet (LAN) for Internet connectivity and service• 802.11n built in WIFI Support• Audio Video Sharing• HbbTVAccessories Included• Remote Control• Batteries: 2 x AAA• Instruction Book• Detachable stand• Stand mounting screws (M4 x 12)Standby NotificationsIf the TV does not receive any input signal (e.g. froman aerial or HDMI source) for 5 minutes, it will gointo standby. When you next switch-on, the followingmessage will be displayed: “TV switched to stand-bymode automatically because there was no signalfor a long time.” Press OK to continue.If the TV is on and it isn’t being operated for a whileit will go into standby. When you next switch-on, thefollowing message will be displayed. “TV switched tostand-by mode automatically because no operationwas made for a long time.” Press OK to continue.TV Control Switch & Operation1. Up direction2. Down direction3. Volume / Info / Sources List selection andStandby-On switchThe Control button allows you to control the Volume/ Programme / Source and Standby-On functions ofthe TV.To change volume: Increase the volume by pushingthe button up. Decrease the volume by pushing thebutton down.To change channel: Press the middle of the button,the information banner will appear on the screen.Scroll through the stored channels by pushing thebutton up or down.To change source: Press the middle of the buttontwice(for the second time in total), the source list willappear on the screen. Scroll through the availablesources by pushing the button up or down.To turn the TV off: Press the middle of the buttondown and hold it down for a few seconds, the TV willturn into standby mode.Notes:• If you turn the TV off, this circle starts againbeginning with the volume setting.• Main menu OSD cannot be displayed via controlbutton.Operation with the Remote ControlPress the Menu button on your remote control todisplay main menu screen. Use the directional buttons