Panasonic TX-40C320E Operating Instructions Manual

Panasonic TX-40C320E Operating Instructions Manual Manual pdf 24 page image

English - 24 -ConnectivityWired ConnectivityTo Connect to a Wired Network• You must have a modem/router connected to anactive broadband connection.• Ensure that Nero Media Home software is installedto your PC (for Audio Video Sharing function). See“Nero Media Home Installation” section.• Connect your PC to your modem/router. This canbe a wired or wireless connection.• Connect your TV to your modem/router via anethernet cable. There is a LAN port at the rear(back) of your TV.Broadband ISP connectionLAN (ethernet) cableLAN input on the rearside of the TV• To access and play shared files, you must select theMedia Player. Press the Menu button and selectMedia Player. Press OK to continue. Select thedesired file type and press OK. You must alwaysuse the Media Player screen to access and playshared network files.• PC/HDD/Media Player or any other devices that arecompatible should be used with a wired connectionfor higher playback quality.To configure wired settings please refer to theNetwork/Internet Settings section in the SetupMenu.• You might be able to connect your TV to your LANdepending on your network’s configuration. In sucha case, use an ethernet cable to connect your TVdirectly to the network wall outlet.LAN input on the rearside of the TVnetworkwall socketConfiguring Wired Device SettingsNetwork TypeThe Network Type can be selected as Wired Device,Wireless Device or Disabled, in accordance with theactive connection to the TV set. Select this as WiredDevice if you are connecting via an ethernet.Internet Speed TestHighlight Internet Speed Test and press the OK but-ton. TV will check the internet connection bandwidthand display the result when complete.Advanced SettingsHighlight Advanced Settings and press the OKbutton. On the next screen you can change the IPand DNS settings of the TV. Highlight the desired oneand press Left or Right button to change the settingfrom Automatic to Manual. Now you can enter theManual IP and / or Manual DNS values. Select therelated item in the drop down menu and enter thenew values using the numeric buttons of the remote.Press the OK button to save settings when complete.Wireless ConnectivityTo Connect to a Wireless NetworkThe TV cannot connect to the networks with a hiddenSSID. To make your modem’s SSID visible, you shouldchange your SSID settings via the modem’s software.To Connect to a wireless LAN, you should performthe following steps:1. Ensure that Nero Media Home software isinstalled to your PC (for Audio Video Sharingfunction).2. To configure your wireless settings please referto the Network/Internet Settings section in theSetup Menu.