Panasonic TX-26LXD1 Operating Instructions Manual

Panasonic TX-26LXD1 Operating Instructions Manual Manual pdf 37 page image

37Images are displayed one after another as a slide show.To start Slide Show access Viewing setup.After setting Interval, Sequence and Repeat, access Slide show.When both SD Card and PC Card are inserted, move to chooseCard and select SD or PC before accessing Slide show.See page 36.Press the OK button at any time to return to the Single mode.Note:When you are in the Slide Show mode, you can change theAspect of the image on screen by pressing the ASPECT buttonon the remote control.Photo View modeMulti modeWhen you press the SD button, thumbnail screen is displayed automatically.After that you can choose your desirable view mode between the following three modes.12 images are displayed.Press to select desired image.Press the OK button to display Single mode.Single modeA single image selected from the index area fills the screen.You can also rotate or magnify the image.Press to select the next or previous image.Press the OK button to display Multi mode.Press the Red or Green button to rotate the image.Each press rotates images 90 °.Press the Yellow button to magnify the image.To restore press the Blue button.Slide ShowOKOKMenuSingleSelectExitPHOTOVIEW MODE0001 / 0013Filename : 102-0001Date : 30 / 03 / 2002Pixel : 1600X1200MenuMultiZoomRotateSelectExitPHOTOVIEW MODE0001 / 0013102-0001OKSlide showIntervalSequenceRepeatCardViewing setup Access5SecOrderOnPCSlide showIntervalSequenceRepeatCardViewing setup5SecOrderOnPCRed GreenYellow Blue