Panasonic TX-26LXD1 Operating Instructions Manual

Panasonic TX-26LXD1 Operating Instructions Manual Manual pdf 19 page image

19MENUOKDuring Analogue or DVB modePress the MENU button.Move to choose Setup menu.Access Setup menu.Move to choose Analogue Tuning Menu.(In DVB mode, choose Shipping condition, then press OK.)Access Analogue Tuning Menu.Move to choose Shipping condition.Access Shipping condition.Press OK to start.Press again, to confirm, each time that you are asked, “Are you sure?”.Switch the TV off at the mains power switch.The next time you switch the TV on, Auto setup will begin. Analogueand DVB stations will be located, sorted and stored ready for use.See page 17.Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to yournew local stations.This can be done either through the Shipping condition menu or through the Auto setup menu.The Shipping condition menu will reset all data, clearing all analogue and DVB tuning information and resettingall control levels back to factory settings.You may need to adjust your VCR or programme position ‘0’ VCR after operating the Shipping condition menu.Programme editAuto setupManual tuningShipping conditionOwner IDAnalogue Tuning MenuAccessReturn ExitStartAll tuning data will be erasedAre you sure ?Are you sure ?Shipping conditionShipping conditionIDTVOK1 2 34 5 67 8 9C 0NMODE