11MENUIDTVOK1 2 34 5 67 8 9C 0NMODEEXITMain menuPicture menuSetup menuSound menuViewing modeBacklightContrastBrightnessColourSharpnessTintColour balanceP-NR3D-COMBNormalOffOnPicture menu DynamicViewing modeBacklightContrastBrightnessColourSharpnessTintColour balanceP-NR3D-COMBNormalOffOnPicture menu DynamicViewing modeBacklightContrastBrightnessColourSharpnessTintColour balanceP-NR3D-COMBNormalOffOnPicture menu DynamicPicture menuPress the MENU button.Move to choose Picture menu.Access Picture menu.Move to choose menu option.Adjust chosen option or access chosen menu.Press the EXIT button at any time to go back to watching TV.Viewing mode The Viewing mode menu allows you to select threedifferent screen settings - Dynamic, Normal andCinema.In each Viewing mode setting, Backlight, Contrast,Brightness, Colour, Sharpness, Tint (in NTSC only),Colour balance, P-NR and 3D-COMB can be adjustedand stored to suit your particular viewing requirement.(e.g., you may require different settings for viewingsports, films, news etc.)Changes to any settings in a viewing mode will affectall signal sources: RF, AV1, AV2, AV3 and AV4.Changes will be stored automatically.By analysing and processing the incoming picture, allthree modes feature automatic enhancement.Increase or decrease the levels of these optionsaccording to your personal preference.With an NTSC signal source connected to the TV, thepicture hue can be adjusted to suit your taste.Allows you to set the overall colour tone of the picture.Choose from Cool, Normal and Warm.Automatically reduces unwanted picture noise.Not available in DVB mode.Occasionally, whilst viewing still or slow movingpictures, colour patterning may be seen. Set 3D-COMBto On to display sharper and more accurate colours.Displayed only when receiving PAL or NTSC signals.Not displayed during RGB Video, S-Video input andAV4C input mode.Backlight, Contrast, Brightness, Colour, SharpnessTintColour balanceP-NR3D-COMB