Panasonic TC-42PD1FA Operating Instructions Manual

Also see for TC-42PD1FA: Service manual

Panasonic TC-42PD1FA Operating Instructions Manual Manual pdf 25 page image

251.Use the Position Up “F” or Down “G”buttons to select the “Manual W/B” menufrom the “Picture” menu, and then use thePosition Right “H” button to select “On”.2.Press the Position Down “G” button.(The “Manual W/B” menu screen will thenbe displayed.)3.Select the required function by pushing thePosition Up “F” or Down “G”buttons, andaccess and alter the setting by pushing thePosition Left “I” or Right “H” buttons.Note:(1) Use the table below as a reference when making “W/B” adjustments.(2) The adjusted values are memorised separately for each Picture Mode (Normal/Dynamic).(3) The adjustment range values should be used as an adjustment reference.Item Effect Adjustment range DetailsW/B High R -30 – 30 Adjusts the white balance for light red areas.W/B High B -30 – 30 Adjusts the white balance for light blue areas.W/B Low R -30 – 30 Adjusts the white balance for dark red areas.W/B Low B -30 – 30 Adjusts the white balance for dark blue areas.Item Adjustment value forcold white balanceAdjustment value forwarm white balanceW/B High R -5 10W/B High B 10 -5W/B Low R 0 0W/B Low B 0 01,2 SelectAdjustPictureNormalPicture ModeManual W/BWhite balanceSharpnessContrastBrightnessTintColourDynamicWarmOff OnMENUExit0030003W/B Low RW/B High B000W/B Low B 0W/B High RSelectAdjustManual W/BNormalMENUExitLess MoreLess MoreLess MoreLess MorePicture MenuHelpful Hint ( Normalisation)If the N button on the remote control unit is pressed when the “Manual W/B” menu is displayed, all adjustment valueswill be returned to the factory setting level.N