Panasonic SC-ALL9 Operating Instructions Manual

Also see for SC-ALL6: Quick setup guide

Contents

Panasonic SC-ALL9 Operating Instructions Manual Manual pdf 6 page image

6 SQT1211Connections≥ This unit consumes a small amount of AC power (l 26)even when turned off.≥ For the purpose of power conservation, disconnect thepower supply if you will not be using it for extendedperiod of time.Some settings will be lost after you disconnect thesystem. You have to set them again.≥ This speaker does not have magnetic shielding. Do notplace them near a TV, PC or other magnetic devices.≥ Do not disconnect the AC mains lead when the unit is on.Doing so may cause malfunction or damage.≥ For details, refer to the operating instructions of thedevice.[SC-ALL6]InstallationThis unit can be installed either vertically orhorizontally.Install the unit with the speaker feet side downas shown below.Automatic standby modeThis unit is designed to conserve its powerconsumption and save energy.The unit will turn to standby modeautomatically if there is no sound and it is notbeing used for approximately 20 minutes.≥ The operation indicator (amber) blinks forapproximately 1 minute before the unit turns tostandby mode. Touch any switch to cancel it.[SC-ALL9] [SC-ALL6]To a household mains socketAC mains lead(supplied)Connection of an externaldevice[SC-ALL9] [SC-ALL6]Audio cable (not supplied)Plug type:3.5 mm stereoVertical HorizontalSpeaker feet Speaker feet