Panasonic SC-ALL9 Operating Instructions Manual

Also see for SC-ALL6: Quick setup guide

Contents

Panasonic SC-ALL9 Operating Instructions Manual Manual pdf 2 page image

2 SQT1211Safety precautionsUnit≥ To reduce the risk of fire, electric shock or product damage,– Do not expose this unit to rain, moisture, dripping orsplashing.– Do not place objects filled with liquids, such as vases, onthis unit.– Use only the recommended accessories.– Do not remove covers.– Do not repair this unit by yourself. Refer servicing toqualified service personnel.– Do not let metal objects fall inside this unit.– Do not place any item on top of this unit.AC mains lead≥ To reduce the risk of fire, electric shock or product damage,– Ensure that the power supply voltage corresponds to thevoltage printed on this unit.– Insert the mains plug fully into the socket outlet.– Do not pull, bend, or place heavy items on the lead.– Do not handle the plug with wet hands.– Hold onto the mains plug body when disconnecting theplug.– Do not use a damaged mains plug or socket outlet.≥ The mains plug is the disconnecting device.Install this unit so that the mains plug can be unplugged fromthe socket outlet immediately.[SC-ALL9] Attachment≥ To prevent injury, this apparatus must be securely attached tothe wall in accordance with the installation instructions.≥ Keep the safety holder, the screws, and the wall mountbrackets out of reach of children to prevent swallowing.Unit≥ Do not place sources of naked flames, such as lightedcandles, on this unit.≥ This unit may receive radio interference caused by mobiletelephones during use. If such interference occurs, pleaseincrease separation between this unit and the mobiletelephone.≥ [SC-ALL9] This unit is intended for use in moderate climates.≥ [SC-ALL6] This unit is intended for use in moderate andtropical climates.Placement≥ Place this unit on an even surface.≥ To reduce the risk of fire, electric shock or product damage,– Do not install or place this unit in a bookcase, built-incabinet or in another confined space. Ensure this unit iswell ventilated.– Do not obstruct this unit’s ventilation openings withnewspapers, tablecloths, curtains, and similar items.– Do not expose this unit to direct sunlight, hightemperatures, high humidity, and excessive vibration.AC mains lead≥ Do not use AC mains lead with other equipment.(For the AC mains plug of three pins)For your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mains plugfor your safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced please ensure that thereplacement fuse has a rating of 5-ampere and that it isapproved by ASTA or BSI to BS1362.Check for the ASTA mark Ï or the BSI mark Ì on the body ofthe fuse.If the plug contains a removable fuse cover you must ensure thatit is refitted when the fuse is replaced.If you lose the fuse cover the plug must not be used until areplacement cover is obtained.A replacement fuse cover can be purchased from your localdealer.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according to the type of AC mainsplug (figures A and B). Confirm the AC mains plug fitted andfollow the instructions below.Illustrations may differ from actual AC mains plug.1. Open the fuse cover with a screwdriver.2. Replace the fuse and close or attach the fuse cover.WARNINGCAUTIONCaution for AC Mains LeadFigure A Figure BFuse coverFigure A Figure BFuse(5 ampere)Fuse(5 ampere)