Panasonic SC-ALL9 Operating Instructions Manual

Also see for SC-ALL6: Quick setup guide

Contents

Panasonic SC-ALL9 Operating Instructions Manual Manual pdf 21 page image

SQT1211 213 Attach the wall mount brackets tothe wall, and then hook the unitsecurely onto them.≥ Make sure that the wall and the screws are capableof supporting at least 50 kg.≥ Use a level to ensure both wall mount brackets arelevel.≥ Connect the AC mains lead to the unit beforehanging the unit onto the wall. (l 6)4 Drive a screw to secure the safetyholder onto the wall.≥ Refer to step 3 for requirements before screwing.5 Attach the fall prevention cord to thewall.≥ Make sure that the slack of the cord is minimal.At least 30 mm‰7.5 mm to‰9.4 mm‰4 mmWall mount bracket(supplied)Screw (not supplied)Space requiredA 573 mmB 524 mmC 407 mmD 156 mmE 248 mm13 mmScrew(not supplied)Safety holder (supplied)Fix to the wallCord (not supplied)Wall anchor (not supplied)Wall