Panasonic SC-ALL9 Operating Instructions Manual

Also see for SC-ALL6: Quick setup guide

Contents

Panasonic SC-ALL9 Operating Instructions Manual Manual pdf 14 page image

14 SQT1211You can preset up to 6 channels ([SC-ALL9]) or2 channels ([SC-ALL6]).≥ A station previously stored is overwritten whenanother station is stored in the same channelpreset.Preparation≥ Make sure that the network is connected tothe Internet.≥ Connect a device with an “AllPlay Radio” appinstalled to the same network as this unit.1 Turn this unit on.≥ Check that the network indicator (blue) lights up.– If the network indicator is blinking in blue andred, wait until the blinking stops.2 Start the app “AllPlay Radio”, andselect a station to playback.≥ Always use the latest version of the app.3 Touch and hold one of the internetradio preset channel switches([SC-ALL9] [1] to [6] / [SC-ALL6] [1] or[2]) on the unit for at least 4 secondsto preset the selected station.The mode indicator blinks as many times as thechannel number of the selected preset channel.e.g.,The mode indicator blinks 2 times when [2] is selected.∫ Listening to a preset channelTouch one of the internet radio presetchannel switches ([SC-ALL9] [1] to [6] /[SC-ALL6] [1] or [2]) on the unit.The mode indicator blinks as many times as thechannel number of the selected preset channel.e.g.,The mode indicator blinks 2 times when [2] is selected.≥ If the selected preset channel has not been preset or thisunit is not connected to the network, the mode indicatorwill not blink.Presetting the favouritestations (Only whenplayback using internetradio app)This unit is compatible with the Qualcomm®AllPlayTM Radio powered by TuneIn.You can preset the favourite stations whenplayback using internet radio app “AllPlay Radio”.Qualcomm ® AllPlay TM Radio powered by TuneIn is aproduct of Qualcomm Connected Experiences, Inc.