VOICE PROCESSING SYSTEM OVERVIEWInstallation Manual 19To change the position, use a pointed object, such as a pen, etc.Ground Terminal:Should be connected to a ground source with less than 1 resistance.RS-232C Connector:Connects an ASCII or VT terminal to the VPS that is necessary to program the system.Memory Card:(One/system) Stores the proprietary system program, and the voice prompts (about 30 minworth); has the capacity to record approximately 6h of messages from callers.1.3.3 Which Phone Systems are Compatible?We recommend integration with the following Panasonic phone systems:• Panasonic KX-TA624• Panasonic KX-TD308• Panasonic KX-TD1232• Panasonic KX-TD816• Panasonic KX-TA1232• Panasonic KX-TD500• Panasonic KX-T336• Panasonic KX-T123211DWe cannot guarantee adequate integration of the VPS with other PBX systems or with KeySystems. If the customer does not have a recommended Panasonic PBX system, be sure thatthe system has the features listed below.The PBX should have the following features for successful integration:• Single line (tip/ring) port circuits (Some PBXs need an OPX card to provide thisconnection.)• Station to station touchtone signaling• Message Waiting Notification from an SLT (single-line telephone)When setting the DIP Switch to any position (except 0):1. Disconnect the station wire(s) and wait a few minutes.2. Disconnect the AC cord from the VPS.3. Set the DIP Switch.4. Connect the AC cord to the VPS.5. Connect the station wire(s) to the VPS and wait approximately 3.5 min.6. Return the DIP Switch to position 0.
