INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBXInstallation Manual 1014.5 COMMON DIGITAL INTEGRATIONFEATURES AND SETUP PROCEDURESThe following features can be used on any KX-T proprietary telephone (7000 series analog;7200/7400 series digital). KX-T7000 series is used with the KX-TA624. The KX-T7200 andKX-7400 series are used with the KX-T series PBX that uses DPT Integration.4.5.1 Live Call Screening (LCS) ProgrammingLCS notifies subscribers of incoming messages to their mailboxes. The notification method isprogrammable for hands-free or private. Hands-free allows the user to monitor a recordingthrough the speakerphone and, if desired, intercept the call by lifting the handset. The privatemode notifies the user with an alert tone when a message is being recorded. By pressing theLCS button, the user can monitor the message and intercept the call by going off-hook. SystemProgramming or PC Programming (only available for KX-TD500 users) also determineswhether the mailbox continues to record after the user intercepts the call.4.5.2 Live Call Screening Password AssignmentTo allow the Live Call Screening feature to work at an extension, the extension must have theLCS button lit. To light this button on the telephone, press the LCS button, then enter thepassword. This password prevents others from activating the LCS feature and listening to themessages as they are being left. (It is not necessary to enter PITS Programming to activate thisfeature.)PC programming is also available for KX-TD500 users (see 4.5.6 Live Call ScreeningAssignment via PC Programming).1. Lift the handset or Press the SP-PHONE button.2. Dial the feature number [77 ] (for KX-TA624) or [799] (for KX-T series PBX that usesDPT Integration) from system program.3. For KX-TA624Press a 3-digit password ([000]-[999]) twice and #.For KX-T series PBX that uses DPT IntegrationPress a 3-digit password ([000]-[999]) twice.You will hear a confirmation tone, then a dial tone.Screen output: The 3-digit password you entered is displayed.4. Hang up or Press the SP-PHONE button.5. Repeat these steps for each telephone.
