INSTALLATIONInstallation Manual 352.5 INSTALLATION STEPSThe following is an overview of the standard installation process using DPT Integration. Whennecessary, other sections in this manual have been referenced for more detailed descriptions orinstructions.1. Obtain a list of current users, their extension numbers, their departments, and the type ofsystems they use (mailbox, no mailbox, beeper, car phone, etc.).2. Assess your customers' needs before setting up the system. You will save yourself time laterby giving customers what they need up front. Ask the office manager how the VPS will beused. Give examples.Recommend that your customer use a word processor to log the greetings. You will findthese files much more easily than the worksheet pages if you need to make changes downthe road.3. Connect the power cord to the VPS, then turn the power switch on.CAUTIONThe power supply cord is used as the main disconnect device. Ensure that the socket-outletis located/installed near the equipment and is easily accessible.4. Install optional port expansion cards (see 2.6 INSTALLING PORT EXPANSIONCARDS: KX-TVP102 OR KX-TVP204).5. Standard Initialisation (For DPT Integration Connection)a) Program the ports of the PBX for voice processing (see Section 4 INTEGRATING THEVPS WITH THE PANASONIC KX-TD DIGITAL PBX).Program the KX-TD500, the KX-TD1232 or the KX-TD816 for Voice Mailintegration.• KX-TD500, KX-TD816, KX-TD1232Programme may be performed on-site or at the office.All memory is stored and will be retained when the unit is powered up as long asthe Rotary Switch has been reset to position [0] prior to turning the unit off.b) Turn the power switch off at the VPS.c) Plug station wire(s) from the PBX into VPS (see 2.7 CONNECTIONS).d) Connect the personal computer to the VPS with a Null Modem Cable (see2.8.2 Connecting the RS-232C Cable).e) Set the Rotary Switch to position 5.f) Turn the power switch back on at the VPS.
