Panasonic KX-TVP200 Installation Manual

Also see for KX-TVP200: Installation manual Installation manual

Contents

Panasonic KX-TVP200 Installation Manual Manual pdf 161 page image

SYSTEM MAINTENANCE AND TROUBLESHOOTINGInstallation Manual 1617.2.12 Custom Service Menu Access Count Clear (CCLR)Each Custom Service has an access counter that counts the number of times the service hasbeen accessed. This command clears this counter.Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN.NoteType CCLR 0 to clear the access counters of all Custom Services.7.2.13 Message Waiting Lamp Retry Times (MWL)Use the MWL command to specify the number of times the VPS will attempt to turn on theMessage Waiting Lamp of the called extension. Apply this setting when a PBX other than thePanasonic KX-T series telephone system is used.NoteThis setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes".[1]-Custom [1]: Custom Service 1 will play when the "1" key is pressed.[2]-Custom [2]: Custom Service 2 will play when the "2" key is pressed.[3]-Custom [3]: Custom Service 3 will play when the "3" key is pressed.[4]-Dept Dial: Department Dialling menu will play when the "4" ispressed.$ CCLR 20Custom Menu <20> Access Counter Cleared !!$ MWLCurrent Setting of M.W.L. Retry Count is 3Enter M.W.L. Retry Count (1-3) =