CUSTOMISING THE SYSTEM128 Installation Manual5.4 AUTOMATED ATTENDANT PARAMETERSAutomated Attendant parameters include: Department Dialing, Operator Parameters, andAlternate Extension.If the VPS needs a special transfer procedure for an extension (such as modem extension),alternate extension should be assigned (see "Alternate Extension Assignment" inB5.1 Automated Attendant Parameters).5.4.1 Automated Attendant MenuAccess the Automated Attendant Menu through the following sequence:System Administration Top Menu:5.4.2 Department DialingDepartment Dialing numbers (1-9) represent department extensions; the VPS will providethese numbers to the caller in the initial list of prompts.Return to Program-Service Setting-Auto. Attn. Setting Menu:Enter The Number: = 1 (Program)Enter The Number: = 4 (Service Setting)Enter The Number: = 1 (Automated Attendant)Program - Service Setting - Auto. Attn. Setting Menu1. Department Dialing2. Operator's Parameters3. Alternate ExtensionEnter The Number : = 1Program - Service Setting - Auto. Attn. Setting - Department Dialing Menu1. Department Dialing No.1 [ ] := 1022. Department Dialing No.2 [ ] := 1043. Department Dialing No.3 [ ] := 1154. Department Dialing No.4 [ ] := 1365. Department Dialing No.5 [ ] := 1076. Department Dialing No.6 [ ] := 1087. Department Dialing No.7 [ ] := 1098. Department Dialing No.8 [ ] := 1109. Department Dialing No.9 [ ] := 111
