Panasonic KX-TDA100 Pc Programming Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Contents

Panasonic KX-TDA100 Pc Programming Manual Manual pdf 737 page image

2.15 [8] ARSPC Programming Manual 7372.15.2 [8-2] Leading NumberSpecifies the area codes and/or telephone numbers as leading numbers that will be routed by theARS feature. A maximum of 1000 different leading numbers can be programmed, and each leadingnumber can select a Routing Plan Table number, which determines the ARS procedure.The additional (remaining) number of digits can also be specified for each leading number. Theadditional (remaining) number of digits must be specified only when "#", for example, is needed afterthe dialled number. The "#" will be added after the programmed number of digits of the user-diallednumber (excluding the leading number).100 leading numbers are displayed at a time. To display other sets of leading numbers, click theapplicable tab.Leading NumberSpecifies the leading number.Value RangeMax. 16 digits (consisting of 0–9, *, #, and X)Maintenance Console Location2.15.2 [8-2] Leading NumberProgramming Manual ReferencesNoneFeature Guide References1.10.1 Automatic Route Selection (ARS)Additional Number of DigitsSpecifies the additional (remaining) number of digits following each leading number.Value Range0–15Maintenance Console Location2.15.2 [8-2] Leading NumberProgramming Manual ReferencesNoneFeature Guide References1.10.1 Automatic Route Selection (ARS)Routing Plan NumberSpecifies the Routing Plan Table number used for each leading number.