2.1 IntroductionPC Programming Manual 272.1.2 Access LevelsThere are three main levels of access to the Maintenance Console: User, Administrator and Installer.Each level has its own Programmer Code, which must be entered to run the Maintenance Console.The allowed format for each programmer code is as follows:Access to menu options within the Maintenance Console is restricted depending on the ProgrammerCode, and the current software mode (see 2.1.1 Starting Maintenance Console and SoftwareModes). When a menu option is limited to certain access levels, this is noted in this manual in theinitial description of that menu option, for example:"This option is only available at Installer level."If a sentence like this does not appear under the heading, the menu option is available at all levels.The target users for each access level are as follows:The options available in each mode and access level are shown below.The access levels are abbreviated as follows:U: User; A: Administrator; I: InstallerA check mark indicates that the menu option is available for that access level.Item LengthUser Level Programmer Code 0 – 16 charactersAdministrator Level Programmer Code 4 – 16 charactersInstaller Level Programmer Code 4 – 16 charactersAccess Level UserUser For end usersAdministrator For system administratorsInstaller For dealers and system installersStart MenuMenu Option Batch InteractiveU A I U A INewOpenConnect—RS-232CConnect—USBConnect—LANConnect—ModemConnect—ISDN Remote
