Panasonic KX-TDA100 Pc Programming Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Contents

Panasonic KX-TDA100 Pc Programming Manual Manual pdf 39 page image

2.2 Start MenuPC Programming Manual 392.2.2 Start Menu—OpenOpens a system data file previously saved on the PC, and enters Batch mode.When opening a file created with an older version of the Maintenance Console, you will be askedwhether you want to convert the data for use with the current version or not. Using the data withoutconverting may result in some data being loaded to an incorrect destination, and is notrecommended.If the file is not supported by the PBX (e.g. a system data file from an incompatible PBX), it will notbe opened. The only files that can be opened are files that were created by the Maintenance Consolefor a supported PBX.To upload a file opened here to the SD memory card installed in the PBX, see 2.6.2 Utility—FileTransfer PC to PBX (SD Card).To open a system data file1. From the start menu, select Open.The Open dialogue box will be displayed.2. Navigate to the folder containing the system data file you want to open.3. Select the file.4. Click Open.If the file was created with an older version of the Maintenance Console, you will be asked if youwant to convert the data.• Click Yes to convert the data for use with the current version of the Maintenance Console.Enter a name for the new converted system file.• Click No to open the file as it is.