2-32 Station Programming (Personal Programming)2.2 Station Programming (Personal Programming)Self-Extension Number Confirmation (Display DPT only)Allows you to display your jack and extension number.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial 6.• The display shows your jack and extension number.2. Press the HOLD (END) button.• The display shows the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Station Programming Data Default SetAllows you to return each of the following programmable items to their default settings.a) Bilingual Display Selection (default: English)b) Call Waiting Tone Type Assignment (default: Tone 1)c) Full One-Touch Dialing Assignment (default: On)d) Handset/Headset Selection (default: Handset)e) Initial Display Selection (default: Caller ID)f) Intercom Alert Assignment (default: Ring-Calling)g) Live Call Screening Mode Set (default: Hands-free)h) Preferred Line Preference — Incoming (default: Ringing Line)i) Preferred Line Preference — Outgoing (default: INTERCOM Line)— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial #.• The display shows:2. Press the STORE button.• The STORE indicator lights.• The display shows the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.216HOLD21AUTO DIALSTOREJack1<=>EXT11Clear Ready?
