4-108 DPT FeaturesP 4.2 DPT FeaturesPhantom ExtensionAllows you to call extensions associated with a Phantom extension. The call is sent toextensions that have the corresponding Phantom Extension button. The lighting patternsof the Phantom Extension button and status are as follows.Off : IdleRed : You are calling a phantom extension.Flashing green rapidly : Incoming callTo call a phantom extensionWhile the Phantom Extension button indicator light is off;1. Press the flexible button which is assigned as the PhantomExtension button.• You may dial the phantom extension number instead.• The Phantom Extension indicator light turns red (steady).To transfer a call to a phantom extensionDuring a conversation with an outside party;1. Press the flexible button which is assigned as the PhantomExtension button.• You may dial the phantom extension number instead.To answer a phantom extension callWhile the Phantom Extension button indicator light is flashing green;1. Press the flexible button which is assigned as the PhantomExtension button.Conditions• A phantom number must be assigned by System Programming before assigning thePhantom Extension button by Station Programming or System Programming.• A flexible CO button can be assigned as the Phantom Extension button.• If several extensions have the same phantom extension number, they will ringsimultaneously.• A maximum of 16 phantom numbers can be assigned.• The phantom number cannot be used for feature settings such as “Call Forwarding”.Programming References• Station Programming (Section 2)Flexible CO Button Assignment — Phantom Extension Button• System Programming — Installation Manual[005] Flexible CO Button Assignment[124] Phantom Extension Number Assignment111
