2-28 Station Programming (Personal Programming)2.2 Station Programming (Personal Programming)Preferred Line Assignment — OutgoingAllows you to select the desired outgoing line preference to originate calls from thefollowing four line preferences:1.) No Line Preference2.) Idle Line Preference3.) Prime Line (Outside Line) Preference4.) Prime Line (INTERCOM) Preference (— default)Follow the programming procedure according to your selection.When setting “Idle Line Preference”, “No Line Preference” or “Prime Line (OutsideLine) Preference”, it is not possible to access any DPT features after going off-hook. Toaccess these DPT features, press the INTERCOM button before or after going off-hook.No Line Preference — Outgoing (Assignment)When you go off-hook, you are not connected to any line. You must choose the line.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial 1.• The display shows the current status.2. Dial 1.• The display shows:3. Press the STORE button.• The STORE indicator lights.• The display shows the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Pref.Out:No23 AUTO DIALSTORE111
