2-20 Station Programming (Personal Programming)2.2 Station Programming (Personal Programming)Voice Mail (VM) Transfer Button (Assignment)Allows you to assign a Flexible CO button as the VM Transfer button.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Press the Flexible CO button you wish to assign as the VMTransfer button.2. Dial 8.• The display shows:3. Dial the Voice Mail extension number.• The display shows:(— xxxx: VM extensionnumber)• To erase an incorrect entry, press the CLR (S2) button orthe TRANSFER (CLEAR) button.(The TRANSFER button becomes the CLEAR button while in theprogramming mode.)4. Press the STORE button.• The STORE indicator lights.• The display shows the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• You cannot enter non-existent extension or a floating number*.• Through System Programming, “VM Command DTMF Set” and “Station HuntingType” must be programmed to match the operation of your Voice Processing System.Programming References• System Programming — Installation Manual[106] Station Hunting Type[114] VM Command DTMF Set* A Floating Number (FN) is a virtual extension number which appears to be an extension.For more details, please consult with your dealer.124 AUTO DIALSTORE3VM extension number8 VTR-CLRVTR-xxxxCLR
