4-10 DPT FeaturesA 4.2 DPT FeaturesAccount Code EntryAn Account Code is used to identify outside calls for accounting and billing purposes.The account code is appended to the “Station Message Detail Recording (SMDR)” callrecord. For incoming outside calls, account codes are not required. For outgoing outsidecalls, account codes are often required. You can enter account codes in the followingthree modes:Verified - All Calls mode: You must always enter the specified account code.Verified - Toll Restriction Override mode: You may enter the specified account code sothat you can override toll restriction.Option mode: You may enter any account code.One mode is selected for each extension on a “Class of Service*1” basis.Soft Button OperationEntering account codes before dialing1. Lift the handset or press the SP-PHONE button.2. Press the ACCNT (S3) button.• You hear an intermittent tone.*2• The display shows:3. Enter the account code and #.• You hear a dial tone.4. Press a CO button or enter the line access code (9 or 81through 83).5. Dial the phone number.Enter ACCNT Code13account code and #phone number2S 1 S 2 S 3ACCNTCO45
