Panasonic KX-TCD560E Operating Instructions Manual

Also see for KX-TCD560E: Operating instructions

Panasonic KX-TCD560E Operating Instructions Manual Manual pdf 25 page image

Useful Telephone Settings25Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333Handset settingsMemo alarmAn alarm will sound for 3 minutes at the settime once or daily. 3 different alarms can beset. A text memo can also be displayed.Set the date and time beforehand (page 11).1 Press $ (centre of joystick).2 Select t, then press ,.3 Select “Memo Alarm”, then press ,.4 Push the joystick up or down repeatedlyto select an alarm (1 to 3), then press,.L Times and memos for previously setalarms will be displayed.5 Select an alarm mode, then press ,.“Off”: Turns the alarm off. Press ,,then press {ih} to finish.“Once”: The alarm will sound once at theset time. Enter the desired day andmonth by selecting 2 digits for each.“Daily”: An alarm will sound daily at theset time.6 Enter the desired hour and minute byselecting 2 digits for each.7 Press / repeatedly to select “AM”,“PM”, or 24-hour time entry, then press,.8 Enter a text memo (32 characters max.,page 56) and/or press ,.9 Select the ringer that will sound at the settime, then press , 2 times.10 Press {ih}.Note:L To stop the alarm, press any dial key.L When in talk or intercom mode, the alarmwill not sound until the call has ended.L The alarm will sound at the set time evenwhen the ringer is turned off.L If you select “Once”, the setting will bechanged to “Off” after the alarm sounds.Ringer optionsRinger volume1 Press $ (centre of joystick).2 Select t, then press ,.3 Select “Ringer Option”, then press,.4 Select “Ringer Volume”, then press,.5 Push the joystick up or down repeatedlyto select the desired volume.6 Press ,.7 Press {ih}.Note:L When the ringer volume is set to off, ~ isdisplayed.L When the ringer volume is set to off, thehandset will ring at the lowest volume forintercom calls and when paged.Vibration featureIf the vibration feature is turned on, thehandset will vibrate whenever a call isreceived, the unit is paged, or when analarm sounds.“On”: The handset will vibrate while ringing.“Vib→Ring”: The handset will vibrate 4times, then ring.“Off”: Turns this feature off.1 Press $ (centre of joystick).2 Select t, then press ,.3 Select “Ringer Option”, then press,.4 Select “Vibration”, then press ,.5 Select the desired setting, then press,.L 9 is displayed while the vibrationfeature is turned on.