Panasonic KX-TCD560E Operating Instructions Manual

Also see for KX-TCD560E: Operating instructions

Panasonic KX-TCD560E Operating Instructions Manual Manual pdf 15 page image

Telephone15Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333Recording a telephone conversation(KX-TCD580 only)You can record your conversation while onan outside call.Important:L Before recording a conversation, youshould inform the other party that theconversation will be recorded.1 Press * (centre of joystick) during aconversation.2 Press ,.L A beep is heard and recording starts.L A beep sounds every 15 seconds andcan be heard by the other party, but isnot recorded.3 To stop recording, press Z.Note:L Recorded conversations are treated asnew messages.L To listen to the recorded conversation, seepage 43.L If message memory becomes full, “Full”is displayed and recording stops. Eraseunnecessary messages (page 43).Answering calls1 Lift the handset and press {C} or {s}when the unit rings.L You can also answer a call by pressingany dial key from {0} to {9}, {*}, {#},or {INT}. (Any key talk feature)2 When finished talking, press {ih} orplace the handset on the charger.Vibration featureWhen this feature is turned on (page 25), thehandset will vibrate to indicate an incomingcall.Auto talk featureYou can answer calls simply by lifting thehandset off the charger. You do not need topress {C}. To turn this feature on, seepage 28.To turn the handset ringer off temporarilyWhen an outside call comes in, press Bor {ih}.Note:L This feature will not work for intercom callsor when the handset is on the charger.Handset locatorUsing this feature, you can locate thehandset if it has been misplaced.1 Press {x} on the top of the base unit.L The base unit will page the handsetfor about 1 minute.L If the vibration feature is turned on(page 25), the handset will vibrate toindicate an incoming page.2 To stop paging, press {x} on the baseunit or press {ih} on the handset.