1.9 DSS Console Features1-98 OperationsPF buttons are provided with no default settings, while each DSS button has a default settingas follows.DSS 01–24: extension numbers 201–224DSS 25–32: no default settingsTo meet your various needs, DSS buttons can be changed to other function buttons.Every DSS or PF button can be assigned to another extension number, telephone number orfeature number.• Be sure the handset is on the cradle and the SP-PHONE button is off.• To program, set the MEMORY switch on the proprietary telephone to “PROGRAM”.• After programming, return the MEMORY switch to the “SET” position.• As to the buttons on your DSS Console, please refer to your DSS Console manual.Initial Settings!!With a Direct Station Selection (DSS) Console, model KX-T7040, you can make or transfercalls and access system features with the touch of a button. The DSS Console must beconnected to a Panasonic Advanced Hybrid System and paired with a PT. SystemProgramming is required to designate the extension ports of the DSS Console. With a pairedtelephone, you can carry out the following operations using the DSS Console.• Direct access to an extension (Direct Extension Dialling)• Quick access to an external party (One-Touch Dialling)• Quick access to a system feature (One-Touch Access for System Features)• Easy transfer to an extension (Call Transfer)• Quick access to the day mode (Time (Day/Night/Lunch) Service)(Operator/Manager only)• Quick access to the night mode (Time (Day/Night/Lunch) Service)(Operator/Manager only)• Quick access to the lunch mode (Time (Day/Night/Lunch) Service)(Operator/Manager only)• Quick setting of the Remote Extension Lock Control (Remote Extension Lock Control)(Operator/Manager only)• The KX-T7040 and Proprietary Telephone (PT) should be placed side by side on your desk.• A single line telephone cannot be paired with the KX-T7040.• For System Programming, please refer to the Installation Manual.!!