1-4 Installation1.2 System FeaturesCaller IDProvides a display proprietary telephone (KX-T7130) user with the caller’s information, suchas the name and telephone number, on the exchange line assigned to receive Caller IDservice.• A contract with a Telephone Company is required.• An optional Caller ID Card must be installed to the system.• All 6 exchange lines can be supported by installing 2 Caller ID Cards. One Caller IDCard supports 3 exchange lines.• System Programming is required to execute this feature.• A display proprietary telephone user can record the caller’s information(+ 2.2 Telephone Features, “Call Log, Incoming”). Up to 20 calls can be logged perextension.• Only the first 16 digits of the caller’s information can be displayed on the LCD while acall is being received, or during a conversation. The first 13 digits are displayed whenlogged information is shown.• An assigned name in program [011] “System Speed Dialling Name Setting” will bedisplayed when the caller’s telephone number matches one of System Speed Diallingnumbers assigned in program [001] “System Speed Dialling Entry” and a TelephoneCompany does not provide the caller’s name.• If a Telephone Company provides a caller’s name, the name from the TelephoneCompany will be displayed even when a name assigned in program [011] is effective.• If both the number and name are available, the user can select the initial display, numberor name, by program [904] “Caller ID Log Priority Selection”.• Some Telephone Companies do not provide the caller’s name with the Caller ID service.• The caller’s telephone number may not be provided in some cases, for example, aninternational or mobile telephone call. In this case, the display will show “OUT OFAREA”, etc.!!
