System Programming 4-634.2 System Programming [510], [513]Selects the operation when the system does not receive either DTMF signals or a FAX(CNG) tone after a programmed length of time. If the optional card is installed, then useprogram [505] “DISA Waiting Time after OGM”. If the optional card is not installed, thenuse program [515] “Intercept Time for Internal DISA”. Intercept or Disconnect isavailable.Intercept: The call is directed depending on programs [408]-[410] “Flexible RingingAssignment–Day/Night/Lunch” (Intercept Routing – No Answer feature).The destination telephone(s) will ring for the time programmed in[509] “DISA Ringing Time after Intercept”.Disconnect: The call is disconnected.Default DISA 1 and DISA 2 – Intercept• Feature ReferencesSection 3, FeaturesDirect Inward System Access (DISA), Intercept Routing[510] DISA No Dial Mode15 NEXT0 STORE ENDSELECT(Intercept/Disconnect)(DISA1/DISA2) To continue+NEXTAssigns the number of times a cyclic tone is detected while the DISA outgoing message issent so that the system can recognise the end of the DISA call.* Disable (Does not detect)Default 4 Times• Feature ReferencesSection 3, FeaturesDirect Inward System Access (DISA), Uniform Call Distribution (UCD)[513] Cyclic Tone Detection* 115 NEXT3 STORE ENDSELECT(Disable*/2/3/4 Times)+*1: Required only when the optional OGM/FAX DetectionCard is installed.