1-6 Operations1.2 Proprietary Telephone SettingsPROGRAMMING I NPUT3 Enter the exchange linenumbers you want to ring(1 through 6).exchange line no. AUTO DIALSTOREExchange Line Ringing SelectionYou can select whether the extension will ring or not when an outside call is received at yourextension.• The “Flexible Ringing Assignment” should be set to “Enable”. (See the InstallationManual.)• When an outside call is received at your extension but does not ring, the line key will flash.If you want to answer the outside call, press the flashing line key.!!q Ringing Line Preference.Preferred Line Assignment — IncomingNo Line Preference: When an incoming outside call is received, the extension usermust go off-hook and then press the flashing line key.Prime Line Preference: When incoming exchange line calls are received at the same time,you can receive the call on the preferred exchange line first onlyby going off-hook.Ringing Line Preference: When an incoming outside call is received, you can receive the(default) call ringing at your telephone by going off-hook.SELECTION PROGRAMMING I NPUTq No Line Preference.q Prime Line Preference.• Setting a new line preference feature will cancel the previous setting.• In “Prime Line Preference” mode, if incoming exchange line calls are received at the sametime except for the preferred exchange line, you must go off-hook and then press the linekey whose indicator is flashing red quickly.2 1AUTO DIALSTORE2 3 Enter the exchange linenumber (1 through 6).exchange line no. AUTO DIALSTORE2 2AUTO DIALSTORE!!
