1.5 During a Conversation1-38 OperationsPlacing a Call on Hold (Call Hold)Allows you to place a call on hold.Placing a call on holdPT SLTPress Recall. Confirmation toneand dial toneDuring a conversationPress HOLD. Confirmation toneand dial toneHOLDDuring a conversationR• The corresponding line key or INTERCOMlight flashes green slowly.• You may replace thehandset.• If the handset is replaced, justgo off-hook to retrieve the call.• You may replace the handset.PT SLTPress the line key or INTERCOMwhich is flashing green slowly.COor INTERCOMAt the holding extensionAt the holding extensionPress Recall.R• The line key or INTERCOM indicator lightturns steady green.Retrieving a call on hold• To retrieve a call on hold at another extension, refer to “Retrieving a Call on Hold (Call HoldRetrieve)”.• If a held call is not retrieved within a pre-determined time (default: 30 seconds), ringing or analarm tone will be heard (Hold Recall/Hold Alarm). If the hold recall time is set to “Disable”,the call will not recall.• If a held outside call is not answered within 30 minutes, it will be automatically disconnected.• When going off-hook:— Before recalling: A dial tone will be heard while the call is on hold. You may dial anothertelephone number.— While recalling: Only the first call on hold will be answered.• You cannot hold a doorphone call.!!
