Picture in Picture External Video and Antenna Connectionthis Receiver has the "PICTURE IN PICTURE" feature. For the proper operation of this feature a second video source is required (such asa VCR). We recommend that you make your antenna and External Video connection as shown below when a second video source isavailable.VCR or VIDEODISC PLAYERIncoming CableFrom Antenna OrCable TV SystemTO VCRTERMINALS ON BACK OF VCRVIDEO OUTAUDIO OUT !Ant Input ANTINPUT....... ..-..Signal Splitter(not Included)To ANT TerminalTERMINALS ON BACK OF RECEIVERF S-VIDEO@INPUT AUDIOINPUT 1VIDEO VIDEO©oiAUDIO AUDIOINPUT 2LOUTPUT TO HIFIIIIIIVHF/UHFIIIIIHelpful Hints:The PIP will operate using Audio/Video input terminals 1,2 or 3. Use the TV/VIDEO button (when the PIP frame is displayed) to selectproper mode.The PIP feature will operate using S-VIDEO input terminal 1.Note: CT-35S31 has 2 Antenna inputs. 0T-35S21 has only one Antenna input.Care and CleaningPicture Tube (Turn set OFF)Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive moisture and wipedry.Plastic CabinetsWipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth.Avoid excessive moisture. Do not use benzene, thinners or other petroleum based cleaners.Wood CabinetsWhen dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional coat of furniture polish will helppreserve the finish. Do not use benzene, thinners or other petroleum based cleaners. Do not place objects made of plastic or rubber directlyon top of the cabinet. A chemical reaction could result causing permanent marring of the finish.Remote Control TransmitterDo not use benzene, thinners or other petroleum based cleaners to clean the Remote Control Transmitter. To clean, wipe with a soft clothslightly moistened with a mild detergent and then wipe dry with a soft clean cloth.-8-